Bespoke Solutions for High Risk Applications
01772 754177
Home // Gas Protection Membranes // VOC & Hydrocarbon Membranes // GP® TITANTANK
GP® TITANTANK
2
GP<sup>®</sup> TITANTANK TDS
GP® TITANTANK TDS
Download
GP<sup>®</sup> TITANTANK PDS
GP® TITANTANK PDS
Download
GP<sup>®</sup> TITANTANK BBA
GP® TITANTANK BBA
Download
GP<sup>®</sup> TITANTANK NBS
GP® TITANTANK NBS
Download
TITAN

GP TITANTANK

GP® TITANTANK
2

GP® TITANTANK® is a self adhesive version of the GP® TITANFLEX®; composed of self-adhesive with an upper surface finish of GP® TITANFLEX®, and a lower surface finish of siliconized polypropylene release film. TITANTANK® is used for the gas /waterproofing/ tanking of underground structures where harmful ground gases are anticipated, as a post applied fully bonded membrane

Read More

Product Benefits

  • Can be a fully welded system.
  • Exceptional chemical resistance.
  • Long term durability – performance is guaranteed for the lifetime of the building.
  • Conform with the latest codes of practice as published by BRE, CIRIA and BSI.
  • High resistance to ground gases.
Make an Enquiry Standard Details
GP<sup>®</sup> TITANTANK TDS
GP® TITANTANK TDS
Download
GP<sup>®</sup> TITANTANK PDS
GP® TITANTANK PDS
Download
GP<sup>®</sup> TITANTANK BBA
GP® TITANTANK BBA
Download
GP<sup>®</sup> TITANTANK NBS
GP® TITANTANK NBS
Download
Product Description

GP® TITANTANK® – a waterproofing gas and hydrocarbon resistant – Self Adhesive Membrane, is a bituminous gas, voc/hydrocarbon proof and water proof sheet, composed of self-adhesive SBS polymer modified bitumen with an upper surface finish of GP® TITANFLEX® membrane and a lower surface finish or siliconized polypropylene release film. GP® TITANTANK® is used for the Gas/VOC/Hydrocarbon/waterproofing of underground structures where harmful ground gasses and contaminants are anticipated, or as a self-adhesive accessory to the GP® TITANTECH® membrane system.

Part of the GP® TITANTECH® family of membranes, the GP® TITANTANK® is a high performance, hydrocarbon barrier, manufactured from a unique HDPE resin. The primary membrane has excellent chemical resistance and is ideal for use on sites affected by hydrocarbon and VOC contamination. It will also effectively prevent the ingress of a number of other harmful gases, including radon, methane and carbon dioxide.

GP<sup>®</sup> TITANTANK
FinishSmooth
ColorBlack
MaterialPolyethylene
ShapeRectangular - supplied in roll form
Size0.3 m x 20 m x 1.2 mm
Warranty Description120 Year
Uniclass 2015PR_25_57_65_90
CAWSJ40/297 Waterproofing/ Damp proofing membrane
J40/20 Loose laid plastics or rubber sheet damp proofing
J40/30 Loose laid plastics or rubber sheet oversite damp proofing
J40/140 Loose laid plastics or rubber sheet gas retardant damp proofing
J40/145 Loose laid weldable polyethylene gas retardant damp proofing
J40/130 Loose laid plastics or rubber sheet oversite damp proofing
J40/120 Loose laid plastics or rubber sheet damp proofing
J40/35 Loose laid plastics or rubber gas retardant damp proofing
Product RangeGas Barriers
MaterialMulti-layer polyethylene.
PurposeGas retardance.
Water resistance.
StandardTo BS EN 13967.
Performance Characteristics
Tensile strength (minimum)>400 N/ 50 mm.
Tear resistance>300 N.
Elongation to break>550 %.
Resistant to underground gasesMethane - 0.13 ml/m2/day atm. Carbon Dioxide - 3.01 ml/m2/day/atm. Radon - 1.0 x 10(-12). Vinyl Chloride - 0.04 ml/m2/day/atm
Water vapour resistance (minimum)0.11 g/m2/day.
Fire performanceTo EN 13501-1, Class E.
Third-party certificationBritish Board of Agrément (BBA) Certificate. BBA Certificate 18/5581.
CE marked to EN 13967.
FormPost applied, self-adhesive VOC/Hydrocarbon and waterproofing barrier membrane.
Root inhibitorYes - Tested to CEN/TS 14461.
Physical properties
ColourBlack
Weight (minimum)1350 g/m2.
Thickness (minimum)1.2 mm.
Width (minimum)0.3 m.
Roll length (minimum)20 m.
Recycled content0%. None – virgin material.
CharacteristicsTest methodUnit
ThicknessEN 1849-21.2 mm
WidthEN 1849-20.9 or 0.3 m
LengthEN 1849-220 m
WeightEN 1849-21350 g/m2
CharacteristicsTest MethodUnit
Water Vapour Transmission RateEN 19310.11 - 0.18 g/m2/day
Water Tightness (60 kPa)EN 1928PASS
Water Tightness (196 kPa - 20 m Water Head) (Basement Application)EN 1928PASS
CharacteristicsTest MethodUnit
Resistance to Static LoadEN 12730-B≥ 20 kg
Puncture ResistanceEN 12236≥ 2.0 kN
Tensile Strength (MD)EN 12311-1> 550 N/50mm
Tensile Strength (CMD)EN 12311-1> 400 N/50mm
Tensile Elongation (MD/CMD)EN 12310-1> 550 %
Tear Resistance (MD/CMD) EN 12310-1> 300 N
Resistance to ImpactEN 12691-B650 mm
Reaction to FireEN 13501-1E Class
Resistance to Artificial AgeingEN 1296/EN 1928PASS
Resistance to ChemicalsEN 1296/EN 1928PASS
CharacteristicsTest MethodUNIT
Transmission Rate of BenzeneEN ISO 15105-2< 3.6 mg/m2/day
Transmission Rate of TolueneEN ISO 15105-2< 13.8 mg/m2/day
Transmission Rate of Ethyl BenzeneEN ISO 15105-2< 2.7 mg/m2/day
Transmission Rate of Xylenes (M,P,O)EN ISO 15105-2< 7.7 mg/m2/day
Transmission Rate of HexaneEN ISO 15105-2< 0.6 mg/m2/day
Transmission Rate of Vinyl ChlorideEN ISO 15105-2< 0.05 mg/m2/day
Transmission Rate of Trichloroethene (TCE)EN ISO 15105-2< 54.7 mg/m2/day
Transmission Rate of Tetrachloroethene (PCE)EN ISO 15105-2< 26.2 mg/m2/day
Transmission Rate of NaphthaleneEN ISO 15105-2< 0.0006 mg/m2/day
Transmission Rate of CIS-1,2-DichloroethyleneEN ISO 15105-2< 1.1 mg/m2/day
CharacteristicsTest MethodUNIT
Methane PermeabilityEN ISO 15105-10.13 ml/m2/day/atm
Methane Permeability (Jointed)EN ISO 15105-11.00 ml/m2/day/atm
Carbon Dioxide PermeabilityEN ISO 15105-13.01 ml/m2/day/atm
Vinyl Chloride Gas PermeabilityEN ISO 15105-10.04 ml/m2/day/atm
Radon PermeabilityK124/02/1951.0 x 10-12 m2/S
CharacteristicsTest MethodUNIT
Chemical Resistance - Sulfuric ACID (10% Solution of Sulfuric Acid (H2SO4)) 50º For 56 DaysEN 14414-ATENSILE STRENGTH RETAINED 100%
RESULT - PASS
Chemical Resistance - BASIC (Calcium Hydroxide Saturated Suspension) 50º For 56 DaysEN 14414-BTENSILE STRENGTH RETAINED 100%
RESULT - PASS
Chemical Resistance - SOLVENTS (35% Diesel, 35% Paraffin, 30% Oil Hd3O (Vol)) 50º For 56 DaysEN 14414-CTENSILE STRENGTH RETAINED >80%
RESULT - PASS
Chemical Resistance - SYNTHETIC LEACHATE (Mixture of 14 Acids, Chlorides, Sulphates & Phosphates) 50º For 56 DaysEN 14414-DTENSILE STRENGTH RETAINED 100%
RESULT - PASS
Resistance to Leaching - HOT WATER (Deionised Water) 50º For 56 DaysEN 14415-ATENSILE STRENGTH RETAINED 100%
RESULT - PASS
Resistance to leaching - AQUEOUS ALKALINE (Saturated Calcium Hydroxide) 50º For 56 DaysEN 14415-BTENSILE STRENGTH RETAINED 100%
RESULT - PASS
Resistance to Leaching - ORGANIC ALCOHOL (30% Methanol, 30% Isopropanol, 40% Glycol) 50º For 56 DaysEN 14415-CTENSILE STRENGTH RETAINED 100%
RESULT - PASS
Chemical Resistance - BENZENE - 100% Saturated ConcentrationEN 14414-D (MOD)TENSILE STRENGTH RETAINED 95% (MD), 102% (CMD)
RESULT - PASS
Chemical Resistance - TOLUENE - 100% Saturated ConcentrationEN 14414-D (MOD)TENSILE STRENGTH RETAINED 94% (MD), 91% (CMD)
RESULT - PASS
Chemical Resistance - ETHYL BENZENE - 100% Saturated ConcentrationEN 14414-D (MOD)TENSILE STRENGTH RETAINED 99% (MD), 97% (CMD)
RESULT - PASS
Chemical Resistance - XYLENES - 100% Saturated ConcentrationEN 14414-D (MOD)TENSILE STRENGTH RETAINED 91% (MD), 106% (CMD)
RESULT - PASS
Chemical Resistance - TCE - 100% Saturated ConcentrationEN 14414-D (MOD)TENSILE STRENGTH RETAINED 99% (MD), 93% (CMD)
RESULT - PASS
Chemical Resistance - PCE - 100% Saturated ConcentrationEN 14414-D (MOD)TENSILE STRENGTH RETAINED 93% (MD), 93% (CMD)
RESULT - PASS
Chemical Resistance - NAPTHALENE - 100% Saturated ConcentrationEN 14414-D (MOD)TENSILE STRENGTH RETAINED 101% (MD), 93% (CMD)
RESULT - PASS
Chemical Resistance - HEXANE - 100% Saturated ConcentrationEN 14414-D (MOD)TENSILE STRENGTH RETAINED 99% (MD), 104% (CMD)
RESULT - PASS
View Data Sheet

Self Adhesive Membranes are bituminous membranes, composed of self-adhesive SBS polymer modified bitumen incorporating an upper membrane element, and a lower surface finish of siliconized release film. The type of SAM is dependent on the application scenario as prescribed below, and they are generally used for the gas/waterproofing of underground structures where harmful ground gasses are anticipated, and as a self-adhesive accessory to GP® membrane systems.

JUTA UK – radon, ground gas, vapour, air and moisture barrier characteristic properties:

  • High Chemical Resistance
  • High resistance to Ground Gasses
  • Long Term Durability (Performance guaranteed for the lifetime of the building)
  • Compatible with all building materials
  • Manufactured to meet the most up to date British Standards and guidance.

GP® TITANTANK® should be installed in accordance with the product installation guidelines, and in accordance with best practice.

GP<sup>®</sup> TITANTANK

A selection of standard details for information and education purposes only. Note - it is strongly advised appropriately qualified, and insured personnel undertake gas membrane installs. A gas membrane performs a critical function in the application setting and has an anticipated design service life in excess of 60 years. Do not attempt to install gas membranes from these details alone. Sole rights for use and distribution are owned by JUTA UK LTD.

GP<sup>®</sup> TITANTANK Installation Guidance
GP® TITANTANK
Installation Guidance
Download
Retaining Wall
TD-JUTA.GP-TT.015 - RC Retaining Wall + Suspended Floor
TD-JUTA.GP-TT.015 - RC Retaining Wall + Suspended Floor
TD-JUTA.GP-TT.016 - RC Retaining Wall + RC Slab Typical
TD-JUTA.GP-TT.016 - RC Retaining Wall + RC Slab Typical
TD-JUTA.GP-TT.004 - RC Retaining Wall + Slab With Toe
TD-JUTA.GP-TT.004 - RC Retaining Wall + Slab With Toe
TD-JUTA.GP-TT.005 - RC Retaining Wall + Slab With Toe (Pre Applied Below Slab)
TD-JUTA.GP-TT.005 - RC Retaining Wall + Slab With Toe (Pre Applied Below Slab)
TD-JUTA.GP-TT.006 - RC Retaining Wall + Slab
TD-JUTA.GP-TT.006 - RC Retaining Wall + Slab
TD-JUTA.GP-TT.007 - RC Retaining Wall + Slab (Pre Applied Below Slab)
TD-JUTA.GP-TT.007 - RC Retaining Wall + Slab (Pre Applied Below Slab)
Cavity Wall
TD-JUTA.GP-TT.002 - Cavity Wall - Perimeter Detail - DPC Termination
TD-JUTA.GP-TT.002 - Cavity Wall - Perimeter Detail - DPC Termination
TD-JUTA.GP-TT.017 - Cavity Wall Tie - Penetration Detail
TD-JUTA.GP-TT.017 - Cavity Wall Tie - Penetration Detail
Lift Pit
TD-JUTA.GP-TT.012 - Typical Lift Pit Detail - Suspended Slab (Pre Applied Below Slab)
TD-JUTA.GP-TT.012 - Typical Lift Pit Detail - Suspended Slab (Pre Applied Below Slab)
TD-JUTA.GP-TT.010 - Typical Lift Pit Detail
TD-JUTA.GP-TT.010 - Typical Lift Pit Detail
TD-JUTA.GP-TT.011 - Typical Lift Pit Detail (Pre Applied Below Slab)
TD-JUTA.GP-TT.011 - Typical Lift Pit Detail (Pre Applied Below Slab)
Pile Cap
TD-JUTA.GP-TT.018 - Typical Pile Cap + Column Detail (Partially Wrapped)
TD-JUTA.GP-TT.018 - Typical Pile Cap + Column Detail (Partially Wrapped)
RC Slab
TD-JUTA.GP-TT.008 - RC Slab _ Maasonry Wall
TD-JUTA.GP-TT.008 - RC Slab _ Maasonry Wall
TD-JUTA.GP-TT.009 - RC Slab _ Maasonry Wall (Pre Applied Below Slab)
TD-JUTA.GP-TT.009 - RC Slab _ Maasonry Wall (Pre Applied Below Slab)
Vertical to Horizontal
TD-JUTA.GP-TT.014 - Vertical To Horizontal Lapping Detail - Option 2
TD-JUTA.GP-TT.014 - Vertical To Horizontal Lapping Detail - Option 2
TD-JUTA.GP-TT.013 - Vertical To Horizontal Lapping Detail - Option 1
TD-JUTA.GP-TT.013 - Vertical To Horizontal Lapping Detail - Option 1
Additional
TD-JUTA.GP-TT.001 - GP Titantank - Reference Detail
TD-JUTA.GP-TT.001 - GP Titantank - Reference Detail

Roll weights can be in excess of 20kg and hence appropriate care and equipment is required for unloading and handling.

Storage Rolls of GP® TITANTANK® should be stored on stable/level ground and stacked not more than five rolls high, with no other material stacked on top. The rolls can be stored outdoors when packaged, but should be protected from exposure to UV.

CE Mark
CE Mark - EN13967:2012
NHBC Logo
NHBC Standards Compliant
Ciria Logo
CIRIA C748 Compliant (VOC Barrier)
BSI Kitemark
BS 8485:2015 Compliant (Methane and Carbon Dioxide Barrier)
BSI Kitemark
BS 8102:2009 Compliant (Type A Waterproofing)

BIM objects are digital descriptions of products or materials that, when combined with other BIM objects create a Building Information Model. These downloadable files can be used for these purposes.

GP® TITANTANK – Self-adhesive version of the GP® TITANFLEX; composed of self-adhesive with an upper surface finish of GP® TITANFLEX, and a lower surface finish of siliconized polypropylene release film.

Version 1 certified to 2.1

RVT Icon
Download
IFC Icon
Download
Site Investigation
Site Investigation
Site Investigation Reports Monitoring Results. We review these reports and advise routes for compliance.
System Design
System Design
Full Ground Gas Protection System Design available.
Specification
Specification
Wide library of standard details with site specific details on request.
Installation
Installation
All our installers are certified NVQ Level 2 qualified installation contractors.
Validation
Validation
We ensure your project complies with the relevant building regulations.

Ground Gas Standards

There are many different standards and guidance documents that detail how to understand the risk of ground contamination, and design solutions to mitigate these risks. The different documents relate to different ground contamination. Below are some of the key documents to be aware of and refer to:

BS 8485:2015+A1:2019 – Codes of practice for the design of protective measures for methane and carbon dioxide ground gases for new buildings.

  • Ground gases typically found near landfill sites, but can occur from other sources
  • Encourages the use of qualified installers
  • Validation to Ciria C735 is a requirement
  • Additional influences on the system should be considered, such as the hydrostatic conditions, and the likelihood of the source contaminant being in direct contact with the protective measures proposed
GP<sup>®</sup> TITANTANK

BRE 211:2015 – Guidance on protective measures for new buildings. (RADON)

  • Naturally occurring ground gas. Larger concentrations in the South-West of UK
  • Minimum recommendation is a membrane of 300 micrometre (1200 gauge) polyethylene sheet or equivalent
  • It must be installed with considerable care and protected once installed
    Taped laps are required
GP<sup>®</sup> TITANTANK

CIRIA C748:2014 – Guidance on the use of plastic membranes as VOC vapour barriers

CIRIA C682:2009 – VOC Handbook

  • Risk-based approach
  • No quantifiable limits on material performance
  • Testing to ISO 15105-2 and EN 14414/EN 14415
  • 9 main VOC types are tested for
  • Welded laps are required as most tapes are made from bitumen/butyl and are affected by VOCs
GP<sup>®</sup> TITANTANK

CIRIA C735:2014 – Good practice on testing and verification of protection systems to buildings from hazardous gases

  • Good practice on testing and verification of protection systems to buildings from hazardous gases
  • Check design and detailing is in accordance with site requirements
  • Checks the competency of the installer (NVQ LEVEL 2 minimum)
  • Test integrity of the membrane/barrier system
  • Visual inspection
  • Written report on inspection/testing and sign-off

BS8102:2009 – Code of practice for protection of below ground structures against water from the ground

GP<sup>®</sup> TITANTANK

JUTA Solutions & Applications

Our gas protection membranes suit a variety of applications and situations, with our TITAN® range offering not only gas protection but also having superior waterproofing and invasive weed control qualities.

BRE 211 NHBC (Amber 1) BS8485:2015 + A1 2019 / NHBC (Amber 2) C748 C748 BS8102:2009 RPS178 C753 BBA Agreement Certificate
Radon Bulk Ground Gasses Cardbon Dioxide and Methane VOC Vapour Permeation Hydrocarbons Immersions TYPE-A Bonded Waterproofing Invasive Weed Control SuDs Impermeable Membrane
GP®1
GP®2
GP®4
GP®5
GP®H
GP®L
GP® TITANFLEX
GP® TITANBOND
GP® TITANTANK
GP® LIQUID BARRIER
GP®H 0.6mm

You may also be interested in...

GP® TITANFLEX
GP® TITANFLEX
View Product
GP® TITANTECH DPC
GP® TITANTECH DPC
View Product
GP<sup>®</sup> TITANBOND
GP® TITANBOND
View Product

Get In Touch With The Experts

If you feel first class service, premium products direct from source, and bespoke solutions are right for you then don't hesitate to contact our team today on 01772 754177 or email us at info@juta.co.uk

Contact Us
01772 754177 // info@juta.co.uk
Melton Grove Works, Blackpool Road, Lytham, FY8 5PL