JUTA

PD1700

JUTA PD1700 is a high compressive strength cuspate High Density Polyethylene (HDPE) drainage core with a geotextile filter bonded to one side. Can be used in combination with GP gas or waterproofing barriers to provide both protection and drainage for external tanking applications.

Read More

Product Benefits

  • Optimised for maximum strength and performance, providing high levels of flow.
  • Complies with the latest codes of practice as published by BS, BRE and CIRIA.
  • Independently tested and verified by UKAS accredited bodies.
Product Description

JUTA PD1700 include a high compressive strength Cuspate High Density Polyethylene (HDPE) Drainage core with a geotextile filter geotextile bonded to one side. Protection Drainage (PD) 1700 is designed as a high flow medium to alleviate hydrostatic pressure on below ground structures, as well as providing protection to the underlying membrane (gas/waterproofing).

ColorBlack
Grey
MaterialPolyethylene
ShapeRectangular - supplied in roll form
Size2 x 20 m x 8 mm
Warranty Description60 year
Uniclass 2015Pr_25_57_65_60 Plastics sheets
CAWSJ40/35 Loose laid plastics or rubber gas retardant damp proofing
J40/140 Loose laid plastics or rubber sheet gas retardant damp proofing
J40/145 Loose laid weldable polyethylene gas retardant damp proofing
MaterialHigh density polyethylene and geotextile fleece.
PurposeProtection layer.
Drainage layer.
StandardTo BS 8102.
Performance characteristics
Tensile strength (minimum)12 kN/m.
Elongation to break12%.
FormDrainage core with geotextile bonded to either side.
Physical properties
ColourBlack and Grey.
Weight (minimum) 620 g/m2
Dimensions
Thickness (minimum)8 mm.
Width (minimum)2 m.
Roll length (minimum)20 m.
Recycled content0%.
Country of material originCzechia
Country of product manufactureCzechia
CharacteristicsTest MethodPD1700
CBR Puncture ResistanceEN ISO 122361700 N
Tensile Strength (MD/CMD)EN ISO 1031912 kN/m
Tensile Elongation (MD/CMD)EN ISO 1031912 %
Compressive StrengthEN ISO 25619140 kPa
CharacteristicsTest MethodPD1700
Pore size (O90)EN ISO 12956100 μm
Permeability (H50)EN ISO 1105879 l/m2/s
In plane water flowEN ISO 129581.83 l/s/m width i = 1.0 @ 20 kPa
(Hard/soft) platensEN ISO 129581.69 l/s/m width i = 1.0 @ 100 kPa
(To simulate soil action)EN ISO 129581.53 l/s/m width i = 1.0 @ 200 kPa
(i) Hydraulic gradientEN ISO 129580.49 l/s/m width i = 0.1 @ 20 kPa
(i) = 1 simulates vertical applicationEN ISO 129580.45 l/s/m width i = 0.1 @ 100 kPa
(i) = 0.1 simulates slope applicationEN ISO 129580.45 l/s/m width i = 0.1 @ 200 kPa
CharacteristicsTest MethodPD1700
Mass per unit areaEN ISO 9864620 g/m2
ThicknessEN ISO 9863-18.00 mm
CharacteristicsPD1700
Roll Width2.00 m
Roll Length20 m
Gross roll weight30 kg

JUTA PD1700 is primarily used for external tanking applications, forming a high compressive strength void, providing a path of least resistance for water, which enables controlled drainage into outlets or connector pies. PD1700 can be used in combination with GP gas/waterproofing barriers to provide both protection and drainage for external tanking application, ensuring gas/waterproofing barrier remains intact and the system performs as intended.

Installation

PD1700 should be installed with the geotextile facing the soil/backfill, and the direction of water flow. Rolls can be cut to size on site. PD1700 can be held in place prior to backfilling with DS Butyl tape (50 mm wide), or mechanically fixed in the absence of a gas/waterproofing barrier.

Adjacent rolls can be overlapped using the geotextile, secured with DS Butyl tape (50mm). Roll ends can be connected by simply butting the cuspate sheet together.

Connection to land drains/collection pipes is achieved by placement within the slotted areas, or removal of the cuspated core and wrapping of geotextile around the pie. Care must be taken not to damage/cut the geotextile during core removal to facilitate the connection.

Backfilling should proceed with caution to avoid undue stress on the PD1700. Compactive effort should be avoided within the first 100mm of the PD1700.

Roll weights can be up to 35kg and hence appropriate equipment is required for unloading and handling. PD1700 is supplied in packaging designed to protect the product from damage during handling and storage, and degradation as a result of UV exposure. PD1700 should be kept in the supplied packaging until such time as it is required for installation, and then covered within 2 weeks of installation.

BBA Logo
CE Mark
UKCA Logo
BSI Kitemark
Ciria Logo

BIM objects are digital descriptions of products or materials that, when combined with other BIM objects create a Building Information Model. These downloadable files can be used for these purposes.

Version 1 certified to 2.1

Download from NBS National BIM Library
Site Investigation
Site Investigation
Site Investigation Reports Monitoring Results. We review these reports and advise routes for compliance.
System Design
System Design
Full Ground Gas Protection System Design available.
Specification
Specification
Wide library of standard details with site specific details on request.
Installation
Installation
All our installers are certified NVQ Level 2 qualified installation contractors.
Validation
Validation
We ensure your project complies with the relevant building regulations.

Juta Solutions & Applications

Our waterproofing membranes and structures suit a variety of applications and situations, with our TITAN® range offering not only superior waterproofing qualities but also offering invasive weed control and gas protection.

Get In Touch With The Experts

If you feel first class service, premium products direct from source, and bespoke solutions are right for you then don't hesitate to contact our team today on 01772 754177 or email us at info@juta.co.uk

Contact Us